How to install CCTV Camera?

Cctv camera is used in the security aspects of the quasi-camera pixels and higher resolution than your computer's video head, just a single cctv camera video capture device, it does not have the data save function. The following brief cctv camera installation steps:

       Step 1: Take out the bracket, necessary to prepare a good tool and parts: up plugs, screws, screwdriver, hammer, drill and other tools; predetermined mounting position, check up the plug and the size of the model of the self-tapping screws good, try one trial bracket screw the screw and cctv camera base is appropriate, the embedded pipeline interface handle, test cables is smooth, ready to enter the installer.

       Step 2: Take out the cctv camera, models and specifications in accordance with pre-determined monitoring camera lens, carefully mounted on the lens (infrared without having to install an integrated camera lens), be careful not to confirm fixed firmly touch the lens and CCD by hand, turn power, connectivity, host monitor, small television sets adjust aperture focal length or field use.

       Step 3: Take the bracket up plugs, screws, screwdriver, hammer, drill and other tools, according to a predetermined location, loaded bracket. Check firmly, cctv camera installed in accordance with the agreed direction;

       Step 4: If you need to install the shield, after the second step, directly from here to install the shield.

1, open the shroud on the cover and tailgate;

2, drawn a fixed metal sheets, will be fixed cctv camera;

3, the power adapter into the shroud;

4, reset on the cover and tailgate, straighten out the cable, fixed onto the bracket.

       Step 5: welded video cable BNC plug socket insert video cable, confirm firmly fixed.

       Step 6: the power output of the power adapter plug into the power jack of the cctv camera, and confirmed firmness.

       Step 7: the other end of the cable access control host or monitor (TV), to ensure that the firm.

       Step 8: turned on the monitoring host and the power of the camera through the monitor to adjust the camera angle to a predetermined range